Flexfill TPE 96A "Natural"
Description
Discover all Flexfill TPE 96A:
- Flexfill TPE 96A „Natural“
- Flexfill TPE 96A „Light Grey“
- Flexfill TPE 96A „Sky Blue“
- Flexfill TPE 96A „Signal Red“
- Flexfill TPE 96A „Traffic Black“
Semi-flexible material based on polyolefinic thermoplastic elastomer with hardness 96 Shore A. This filament is safe for food-contact applications and for applications in contact with skin.
Wear resistance guarantees the durability of 3D printed products. Great for sealings especially in the presence of certain substances, the ability to seal is preserved also at higher temperatures. This material has very low gas permeability.
Features:
- Safe for food-contact and skin-contact applications
- Dimensional stability
- Smooth matte finish
- Pleasant to touch
- Semi-flexible
- Tear strength, abrasion resistance
- Chemical resistance against acids, alcohols, alkalis, and water
- Resistant against dirt, washable
- Recyclable
- BPA-free
- Low odor
- Safe to use in electrical and electronic equipment
Working temperature: | 225–245 °C |
Heated bed: | 50–60 °C |
Diameter: | 1.75 mm |
Diameter tolerance: | +/- 0.10 mm |
Weight: |
500 g of filament (+ 230 g spool)
|
The length of the filament: |
170 m (1.75 mm, 500 g)
|
RAL | Pantone | HEX: |
N/A | N/A | N/A
|
- 3D Printing Guide
- Webinars
- The use of a direct drive extruder is highly recommended
- For proper printing of flexible material with higher speed and quality, buy an appropriate printing device
- For a good adhesion use Magigoo PP
- Because of its chemical structure, this material is sensitive to stress whitening. It is usual, that the stress created by impact or tension causes the microcracks. It can be partially removed by the heat gun. If possible, limit the bending of the printed object. For dynamically stressed parts, it is better to use Flexfill TPU or Flexfill PEBA 90A. It does not affect the functionality of the filament
- Drying filaments before processing
- Spools Dimension
- Data Sheets
Comparison of our Flexfill family:
Flexfill TPE 96A | Flexfill TPU 98A | |
Polymer base | Polyolefin + SEBS | Polyurethane + ester |
Tensile strength | 5 MPa | 54 MPa |
Elongation at break | 150 % | 320 % |
Density | 1.15 g/cm³ | 1.23 g/cm³ |
Moisture absorption | Low | High |
Chemical resistance | Water, acids, alcohols, alkalis | Oils, greases, ozone |
Food & skin contact | Safe for use | Not recommended |
Gas permeability | Low | High |
Weather resistance | Stable | Stabilized |
Optical properties | Matte, non-translucent | Glossy, transparent |
The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.
Food Contact Declaration by request on helpdesk@fillamentum.com
You may also like: