Nylon AF80 Aramid
Toto vlákno z polyamidu 12 , vyztužené 8% aramidovými vlákny , nabízí vynikající chemickou odolnost, tribologické vlastnosti a vysokou stabilitu v širokém teplotním rozsahu. Perfektní pro odolné díly, jako jsou ložiska, ozubená kola a odvíjecí kola, odolává i drsným chemikáliím, včetně automobilových kapalin.
✅ Výjimečné mechanické vlastnosti zachovány od -40 °C do +140 °C
✅ Vysoká odolnost proti opotřebení a nízká tepelná roztažnost pro náročné aplikace
✅ Vynikající chemická odolnost vůči široké škále látek
✅ Bezpečné pro použití v elektrických zařízeních, bez BPA a s nízkými emisemi
10 YEARS OF EXPERIENCE
We have been on the market for 10 years, gathering extensive experience.
FAST SHIPPING
All orders placed by 11:00 CET are shipped the same day. Average delivery time is 2–4 days worldwide.
B2B PROGRAM
Get special prices, tailored shipping, and direct invoicing with our exclusive B2B program.
LOYALTY PROGRAM
Earn Fella Coins with every purchase and redeem them for discounts or free shipping.
PREMIUM QUALITY
We focus on Process Capability Index (CPK) to ensure every filament spool meets top quality standards.
COMPATIBLE WITH EVERY PRINTER
Our spools work with all printers and AMS. Specific settings or profiles are available for most models.
Printing Temperature: 235 – 260 °C
Bed Temperature: 80 – 110 °C
Printing Speed: 30 – 50 mm/s
Cooling Fan: 0 %
More information in our printing guide 👇
- Průměr: 1,75 mm
- Tolerance průměru: +/- 0,10 mm
- Hmotnost: 600 g vlákna (+ 230 g cívka)
- Délka vlákna:
243 m (1,75 mm, 500 g)
| Nylon AF80 Aramid | Nylon CF15 Carbon | Nylon FX256 | |
|---|---|---|---|
| Tensile strength: | 50.4 MPa | 54.5 MPa | 45 MPa |
| Elongation on break: | 5.8 % | 103% | 50% |
| Impact resistance: | 53.2 kJ/m² (unnotched) * | 86.2 kJ/m² (unnotched) * | 7 kJ/m² *** |
| Ease of printing: | *** | ** | * |
| Wear resistance: | *** | *** | ** |
| Creep resistance: | *** | *** | * |
| Heat resistance: | from -40 °C up to 140 °C | from -40 °C up to 140 °C | from -40 °C up to 140 °C |
| Heat resistance at high load: | **** | *** | * |
Dobrá mezivrstvová přilnavost
Mechanické vlastnosti zachovány v rozsahu -40 °C až +140 °C
Tribologické vlastnosti
Hladký povrch
Dobrá tvrdost
Odolnost proti opotřebení
Odolnost proti tečení (odolnost proti deformaci při dlouhodobém zatížení)
Tuhost & pevnost
Tepelná odolnost i při vysokém zatížení
Nízká tepelná roztažnost
Chemická odolnost vůči široké škále látek
Nízká hustota
Bezpečné použití v elektrických a elektronických zařízeních
Nízké emise výparů, bez BPA, bez styrenu
Customer Reviews
Normally if you have a good material, and on the print some imperfections to see, then those are magnified through the observer's eye. With this material I don't even see how the walls are connected to the top layers, however for strength they are 10 % overlap. In a 85 celsius heated chamber the 60 deg overhang without support is also acceptable, but 55 deg is as perfect as a 15 deg wall.
This filament was shockingly easy to print with (K1C), and is even stronger than I had expected. I use it for parts that need exceptional durability such as the wheel hub of a heavy remote control car (pictures). I tried using PETG and regular Nylon, but both filaments failed. The Aramid AF80 works perfectly though.
Other than drying, AF80 is surprisingly easy to print with a 0.8mm nozzle, on a Bambulabs X1C, engineering plate, with Magigoo PA.
Like FX256, AF80 parts are tough, even below freezing, or wet. AF80 doesn't seem as stiff as PA, or even some CF & GF filaments but it's stiffer than FX256. The upside to not being quite as stiff is that AF80 is less brittle than some PA-CF filaments I've tried. This also warps noticeably less than NylonFX256 and shouldn't creep over time (haven't confirmed this).
My only complaint is that there's no grey/black option. AF80 might look really interesting mixed with the natural aramid color. The existing yellow/beige looks like an old ABS computer case from the 1990s - but this is a very minor complaint for an engineering filament.